Loading...
 Start Page

Greenhouse Film

logo agro4
Greenhouse film
Greenhouse film

Agro UV 2 & 3

Greenhouse film with 2&3 year life span and maximum resistance to sulphur because it is stabilized with nickel stabilizer. It has a green/yellow tint and offers great sunlight penetration. It also retains heat to avoid overnight temperature fluctuations. Suitable for all kinds of crops.

It can be manufactured with the following qualities:

  • Diffusion, to avoid shadows and achieve maximum plant photosynthesis.
  • Antidrip, to avoid formation of condensation droplets, which decrease sunlight and result to diseases.
  • Great tolerance to sulphur with the use of special stabilizers.

»  Nominal thickness: 150m and 180m.
»   Up to 14m wide.
(Other dimensions available at customer’s request).

Product Properties: Light Diffusιon film quality. Sunlight is diffused and shadows are not created. Also, local exposure of plants to sunlight is avoided. It does not prevent penetration of sunlight. Better photosynthesis and plants are not overheated. Antifog (Αntidrip) film quality to prevent formation of droplets inside the greenhouse. Droplets drastically decrease sunlight penetration and encourage growth of microorganisms that promote plant diseases. Antisulpuhr film quality. Film is resistant to sulphur sprays. Antivirus film quality that keeps disease carrying insects outside the greenhouse. Thermophilic quality to maintain greenhouse temperature 2-3 degrees higher than air temperature and to avoid overnight temperature fluctuations. Anti-dust quality; it does not collect dust and any dust, mud or dirt that is deposited can be easily removed with water. In most cases, the excellent sunlight penetration of transparent films drastically reduces after 10-15 days because of the dust or mud and dirt collected on the greenhouse exterior surface (mainly in low tunnels). The antidust quality of the film’s exterior surface significantly prevents accumulation of dust and mud and dirt are easily removed simply by hosing down with water.

Agro UV3

Transparent greenhouse film with a 3-year life span and very good tolerance of agrochemicals. Great sunlight penetration and heat retention. Suitable for cultivation of strawberry, bean, etc. crops. Made of high endurance and high elasticity Polyethylene with excellent mechanical qualities to resist strong side winds.

According to the particular crop requirements, the film can be adapted to include the following qualities:

  • Great EVA percentage for great transparency, sunlight penetration and elasticity.
  • Great resistance to sulphur with the use of special stabilizers.
  • Diffusion to avoid shadows and achieve maximum plant photosynthesis.
  • Antidrip, to avoid formation of droplets that decrease sunlight penetration and promote diseases.
  • Antivirus, to keep disease carrying insects away.

»  Thickness:150 m.
»  Up to 14m wide.

Product Properties: Light Diffusιon film quality. Sunlight is diffused and shadows are not created. Also, local exposure of plants to sunlight is avoided. It does not prevent penetration of sunlight. Better photosynthesis and plants are not overheated. Antifog (Αntidrip) film quality to prevent formation of droplets inside the greenhouse. Droplets drastically decrease sunlight penetration and encourage growth of microorganisms that promote plant diseases. Antisulpuhr film quality. Film is resistant to sulphur sprays. Antivirus film quality that keeps disease carrying insects outside the greenhouse. Thermophilic quality to maintain greenhouse temperature 2-3 degrees higher than air temperature and to avoid overnight temperature fluctuations. Anti-dust quality; it does not collect dust and any dust, mud or dirt that is deposited can be easily removed with water. In most cases, the excellent sunlight penetration of transparent films drastically reduces after 10-15 days because of the dust or mud and dirt collected on the greenhouse exterior surface (mainly in low tunnels). The antidust quality of the film’s exterior surface significantly prevents accumulation of dust and mud and dirt are easily removed simply by hosing down with water.

Agro UV2

Greenhouse film with 2-year life span and very good endurance to agrochemicals. Great sunlight penetration and heat retention; suitable for cultivation of strawberry, bean, etc. crops. Made of high endurance and high elasticity Polyethylene.

According to the particular requirements of the crops, the film can be adapted to include the following qualities:

  • Great EVA percentage for great transparency, sunlight penetration and elasticity.
  • Great resistance to sulphur with the use of special stabilizers.
  • Diffusion to avoid shadows and achieve maximum plant photosynthesis.
  • Antidrip, to avoid formation of droplets that decrease sunlight penetration and promote diseases.
  • Antivirus, to keep disease carrying insects away.

»  Thickness: 150 m.
»  Available width: 6.5 m.
»  Can be manufactured up to 14m wide.

Product Properties:Light Diffusιon film quality. Sunlight is diffused and shadows are not created. Also, local exposure of plants to sunlight is avoided. It does not prevent penetration of sunlight. Better photosynthesis and plants are not overheated. Antifog (Αntidrip) film quality to prevent formation of droplets inside the greenhouse. Droplets drastically decrease sunlight penetration and encourage growth of microorganisms that promote plant diseases. Antisulpuhr film quality. Film is resistant to sulphur sprays. Antivirus film quality that keeps disease carrying insects outside the greenhouse. Thermophilic quality to maintain greenhouse temperature 2-3 degrees higher than air temperature and to avoid overnight temperature fluctuations. Anti-dust quality; it does not collect dust and any dust, mud or dirt that is deposited can be easily removed with water. In most cases, the excellent sunlight penetration of transparent films drastically reduces after 10-15 days because of the dust or mud and dirt collected on the greenhouse exterior surface (mainly in low tunnels). The antidust quality of the film’s exterior surface significantly prevents accumulation of dust and mud and dirt are easily removed simply by hosing down with water.

 

  DESCRIPTION     ATTRIBUTES LIGHT PENETRABILITY
A/A   UVYEARS  NI EVA  AS  IR  AD DF AF  AV TOTAL DIFFUSION
1 AGRO UV 2&3 3           >85 <35
2 AGRO UV 2&3  3         >85 <35
3 AGRO UV 2&3  3       >85 <35
4 AGRO UV 2&3  3 >85 <35
5 AGRO UV 2 2              >85  <35
6 AGRO UV 2 2            >85   <35 
7 AGRO UV 2 2          >85   <35 
8 AGRO UV 2 2    >85  <35
9 AGRO UV 3 3             >90  <35 
10  AGRO UV 3  3         >90 <35
11  AGRO UV 3  3         >90 <35
12  AGRO UV 3  3    >90   <35 
     Standard     Choice of customer

Clarification

sima1 whiteIR

Thermophilic quality to maintain greenhouse temperature 2-3 degrees higher than air temperature and to avoid overnight temperature fluctuations.


sima2 whiteAD

Anti-dust quality; it does not collect dust and any dust, mud or dirt that is deposited can be easily removed with water. In most cases, the excellent sunlight penetration of transparent films drastically reduces after 10-15 days because of the dust or mud and dirt collected on the greenhouse exterior surface (mainly in low tunnels). The antidust quality of the film’s exterior surface significantly prevents accumulation of dust and mud and dirt are easily removed simply by hosing down with water.


sima3 whiteDF

Light Diffusιon film quality. Sunlight is diffused and shadows are not created. Also, local exposure of plants to sunlight is avoided. It does not prevent penetration of sunlight. Better photosynthesis and plants are not overheated.


sima4 whiteAV

Antivirus film quality that keeps disease carrying insects outside the greenhouse.


sima5 whiteAS

Antisulpuhr film quality. Film is resistant to sulphur sprays.


sima6 whiteAF

Antifog (Αntidrip) film quality to prevent formation of droplets inside the greenhouse. Droplets drastically decrease sunlight penetration and encourage growth of microorganisms that promote plant diseases.


Mic Gr/m2 M2/kg
15 13.86 72
20 18.86 53
21 19.44 51.5
25 23.1 43
30 27.7 36
35 32.34 31
60 55.44 18
125 115.5 8.6
150 138.6 7
180 166 6

CENTRAL OFFICE & FACTORY:

4, Fteris str., Aigio P.C. 25 100
Tel: +30 26910 28287
Fax: +30 26910 29500
E-mail: info@achaika.gr

OFFICE - STORE

31, Orestou str., Athens P.C. 118 53
Tel: +30 210 3457879
Fax: +30 210 3473348
E-mail: athens@achaika.gr

FACTORY

Komotini Industrial Area:
Tel: +30 25310 38698
Fax: +30 25310 98288
E-mail: komotini@achaika.gr

Komotini Industrial Area ELVIPLΑS SA:
Tel: +30 25310 38710
Fax: +30 25310 98288
E-mail: elviplas@achaika.gr

GEMI 35020916000

          
Copyright © 2017 - 2024 ACHAIKA PLASTICS S.A.